Quick Introduction:
This product is a Smart Wi-Fi Photoelectric Smoke Sensor 🔥🚨. It detects smoke in real time, and when a fire hazard is identified, the sensor's red LED will light up and...
 
...sound an alarm to alert you and your family in time ⏰👨‍👩‍👧‍👦. Ideal for homes, lounges, coffee shops, dance halls, and other areas requiring fire alarm monitoring. (Note: This sensor does not detect gas or heat).
 
Key Selling Points:
 
Wi-Fi + Bluetooth Dual Connection Modes 📶:Connect to the network 2x faster than Wi-Fi alone!
 
90dB(A) Loud Alarm 🔊: Ensures quick response to potential fires, helping you act swiftly.
 
Mobile App Alerts 📱: Receive notifications instantly, protecting you from danger and financial loss.
 
Real-Time Smoke Detection 🚬: Alerts you to dangerous smoke levels, keeping your home safe from potential threats.
 
Recommended Installation Location 🛠️: The alarm can be installed on flat or sloping ceilings. For sloped roofs, the angle should be less than 45°, and the sensor should be installed at least 50cm away from the edge.
 
Flat Ceiling Mounting 🏠: The best position is the center of the ceiling, as smoke, heat, and combustible gases rise and spread laterally. Keep at least 30cm from lights or decorations.
 
Sloping Ceiling Installation 🛖: For sloped ceilings, install the smoke sensor 90cm horizontally from the ceiling pendant.
 
Specifications:
Material: Durable ABS Plastic 🛡️
Wi-Fi: 802.11 b/g/n 🌐
Power Supply: AAA Battery (not included) 🔋
Detection Range: 20m² 📏
Standby Current: ≤10uA 💡
Installation Type: Ceiling mount
Alarm Current: ≤120mA
Working Temperature: -10°C to 50°C 🌡️
Low Voltage Warning: ≤2.4V ⚡
Working Humidity: ≤95% 💧
Alarm Sound Level: 90dB/1m 🔊
Dimensions: 90x90x40mm 📐
 
简介：
 
这款产品是一款智能Wi-Fi光电烟雾传感器🔥🚨，可以实时检测烟雾的存在。当检测到火灾烟雾危险时，传感器的红色LED灯会亮起并...
 
...发出报警声，及时提醒你和家人⏰👨‍👩‍👧‍👦。适用于家庭、休息室、咖啡馆、舞厅等需要火灾报警监控的场所。（注意：此传感器不能检测气体或热量）。
 
卖点：
Wi-Fi + 蓝牙双连接模式 📶：比单独Wi-Fi连接快2倍！
 
90dB(A) 大声报警 🔊：确保人们及时响应并快速处理潜在的火灾。
 
手机APP报警推送 📱：让您摆脱潜在危险和经济损失。
 
实时烟雾检测提醒 🚬：及时提醒您危险的烟雾浓度，保护您的家免受潜在威胁。
 
推荐安装位置 🛠️：报警器可安装在平顶或倾斜的天花板上。如果需要安装在倾斜或菱形屋顶上，倾斜角度不应大于45°，且距离应保持50cm以上。
 
平顶安装 🏠：烟雾传感器的最佳安装位置是天花板中央，因为上升的烟雾、热量和可燃物会横向扩散。请保持至少30cm远离灯具或其他装饰物。
 
倾斜天花板安装 🛖：如果天花板是倾斜的，请在离天花板吊坠水平90cm的位置安装烟雾传感器。
 
规格：
材质：耐用的ABS塑料 🛡️
Wi-Fi：802.11 b/g/n 🌐
电源供应：AAA电池（不包含）🔋
检测范围：20平方米 📏
静态电流：≤10uA 💡
安装方式：天花板安装
报警电流：≤120mA
工作温度：-10°C 至 50°C 🌡️
低电压提醒：≤2.4V ⚡
工作湿度：≤95% 💧
报警音量：90dB/1米 🔊
尺寸：90x90x40毫米 📐